Introduction The EG series three-phase industrial standard motors are specifically designed in accordance with IEC publications and national standard specifications such as CEI,DIN and VDE. The EG series has been designed and engineered in compliance with the latest technical knowledge and production process,and has reached a hign standard in both of these fields.
Technical Description General Information
Regulation The technical design of the motors is in accordance with IEC 60034-1 and IEC 60034-72.The table below lists those regulations corresponding to IEC 60034-1 and in particular those apecifications which the EG series motors comply with .
International Regulations IEC 60034-1
National regulations ItalyCEI 2-3,VI/1963 Federal Republic of Germany VDE0530 Belgium NBN7/1963, Supplement 1967 Denmark DS 5002/1958 France NFC 51-200/1964 NFC 51-100/1969 Great BritainBS 2613/70 Supplement 1971 BS3979 NetherlandsNEN 3137/1967 Norway NEK 41.69-49.72 Sweden SEN 2601/1974 SwitzerlandSEV 3009/1966
Regulations applicable to furthnical details are listed in the following table:
Technical term |
IEC |
CEI |
DIN/VDE |
Technical requiremengt and testing |
IEC 60034-1 |
CEI 2-3 |
VDE0530 |
Types of construction and mounting |
IEC 60034-7 |
CE12-14 |
DIN42 950 |
Enclosures |
IEC60034-5 |
Ce170-1 |
Din40 950 |
Power ratings |
IEC60072 |
CE12-3 |
DIN 42 943 |
Coupling dimensions |
UNEL13113-71 IBMB3 UNEL13117-71 IBMB5 UNEL13118-71 IBMB14 |
DIN 42 673/1 DIN 42 677/1 |
Staight shaft extensions |
DIN 42 946 |
Tolerances for lange mounted motors |
DIN 42 955 |
Class of insulation |
IEC60085 |
CEI 2-3 |
VDE 0530 |
Thus,EG series motors comply with the regulations of European coentries to great extent.
The EG series three-plese industrial standard motors are specifically designed in accordance with IEC publications and national standard specifications as CEI,DIN and VDE。
The EG series has been designed and engineered in compliance with the lasest technical knowledge and production process,and has reached a hign standard in both of three fields.
1. Technical Description
1.1 General Information
● Regulation
The technical design of the motors si in accordance with IEC 60034-1 and IEC 60034-72.The table below lists those regulations corresponding to IEC 60034-1 and in particular those apecifications which the EG series motors comply with .
● International Regulations
IEC 60034-1
● National regulations
Italy CEI 2-3,VI/1967
Federal Republic of Germany VDE0530
Belgium NBN7/1963, Supplement
Denmark DS 5002/1958 France NFC 51-200/1964 NFC 51-100/1969
Great Bretain BS 2613/70 Supplement 1971 BS3979
Netherlands NEN 3137/1967
Norway NEN 41.69-49.72
Sweden SEN 2601/1974
Switzerland SEV 3009/1966 |